Dear friends,in order to improve the speed and efficiency of the work and better services for buyers, please specify the declared value in invoice, to avoid unnecessary trouble at customs.
In addition,Brazil and Argentina customer pls leave your CPF or CUIT number after payment!
Russian customer best tell the full name, or will affect the delivery time.
Thank you for your assistance!
- 3 x TB6560 MD430 single axis driver
- 3 x 23HS8430B stepper motor (dual shanft ,3.0A 270Oz-in)
- 1 x 350W 24V/10A switching power supply
- 1 x 5 axis breakout board
- 1 x DB25 parallel cable
- 1 x USB cable
- English user manual for breakout board and stepper motor driver will send by email.
1. TB6560 MD430 Low noise of stepper motor driver
MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth–S3/S4), torque (100%, 75%, 50%, 20%–S5/S6) ,work current (0-3A–SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%). MD430-HZ
1) Single-chip motor driver for sinusoidal microstep control of stepping motors
2) Power on in indication led
3) 3Amps-34Volts(Supply voltages:12-34DC)
4) Full step, half step, eight step and sixteenth step(selection with dipswitches)
5) Torque (100%, 75%,50%, 20%)
6) Work Current (0-3A selection with SW1/SW2/SW3)
7) 4 Wire,6 Wire,8 Wire stepper motors can be used
8) Two phases bipolar driver
9) Easy wiring with standard screw terminals
10) Step frequency up to 100khz
11) Fuse protection on power supply rail(protects the board,but also your power supply and motor)
3. Application fields
Suitable for all kinds of small and medium-sized automation equipment and apparatus For example, laser machines, laser engraving &cutting machine, laser subsurface engraving machine, laser handicraft cutting machine, (nonmetal materials) laser marking machine, laser seals engraving machine and photosensitive seal machine.
2. 5 axis CNC Breakout board interface adapter board
1, full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control;
2, leads to all the parallel port of all 12 data transmission output pin, which can control the five stepper motor driver;
3, with 5-way input interface, you can access the limit switches and emergency stop switch, reset knife;5 input LED indicates the status of the input;
4, all the way with a 12A relay control, normally open, normally closed leads, user-friendly connection;
5, power supply with 5V USB power supply or external power supply to facilitate the access of external power supply;On the external drive enable signal amplification, filtering, enhancement processing;
6, the pulse, the direction of signal shaping, enhanced with a carrying capacity, data transmission speeds reach 10 MBit / S;
7, the output pin with extension interfaces can 2.54mm pin 2.54mmXH-Block;
1,the use of new imported Japanese Toshiba TB6560 chip (disguising);
2,The base used dense teeth radiator, cooling super, to ensure the stable operation of equipment;
3,the input signal using a high-speed opto-isolation to ensure not losing steps, which the pulse direction signals with the same level of 6N137, dual high-speed optocoupler;
4 a variety of semi-flow mode and the semi-flow current selection, the use of more flexible
5,Decay mode is adjustable to ensure the motor running smooth;
6.,Sophisticated appearance size cooling pad size: 75mm * 65mm, four mechanical installation positioning hole size is: 67mm * 58, mounting hole diameter is 4mm
7,Set method detailed table on the board, easy to use;
8,With anti-reverse circuit, even if not careful the power plug back and will not burn the chip, the use of safer.
3. Stepper Motor
Step angle accuracy:+ – 5%(full step,not load)
Resistance accuracy: + – 10%
Inductance accuracy:+ – 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature ———-20deg —- +50deg
Insulation resistance:100ohm Min,500VDC
Insultion Strength——–500VAC for one minute
Datasheet (23HS8430B,front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque)
Note:if you need double shaft pls contact us,we can produce.
Motor lead wires:
4.Switching power supply
350W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:24v/14.5 A,single output switching power supply
Item will ship within 2-4 business days on payment received
We are not responsible for wrong or undeliverable address,please
Double check your address when you write in AliExpress, if you want change before we ship out.pls notice us the new address.
Delivery time :
By China post Air Mail: 45-60 days or more
By China poat air parcel :35-45 or more
By EMS :25-30 days Brazil need to more
By DHL/FEDEX :3-8 days
If the order is during the weekends,it will take 2 days longer,we are not responsible for any delay of order if we have shipped out,because the speed of shipping is out our control, thanks for your understanding.
1.Before purchasing, pls confirm details with us if you have request on items.
2.Pls make payment within 3 days of the order if possible.
3.Alipay(escrow),Credit Card,Western Union,Bank TT, paypal etc are accepted.
Problem & Feedback
We appreciate your positive feedback and 5 stars,this item is for getting feedback rating only without any profit
If you give us the feedback after receive the goods within 3 days,will be presented the next time you purchase a beautiful gift.
1.)we care about our valued customers,and will always try to help you,hope to establish long business with you.
2.)Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have,and will try our best to resolve the issues.
3.)Pls contact us by Trademanager or email before leaving any negative feedback or opening any dispute on the site,we will help you to resolve the problem,
Any reason required for all refund. Item must be in it’s original condition and no physical damage,buyer responsible for all shipping cost.
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.
Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again.
Customer’s satisfaction is very important to us.